Making templates for the spinner. The cut-out's must not be too close. Some builders use various methods
to make the blades twist. I looked at production aircraft spinners to plan the gaps around the spinner
and blade.
I taped the templates to the backplate and fitted the spinner.
I was then able to draw on the position of the blade.
Prop fitted with spinner
Images & text copyright GAPilot & Go-7. This mail is not connected
to Vans Aircraft Inc. The contents of this site is the opinion of the author,
not Vans Aircarft, PFA, CAA or FAA. Please check all information is correct
before you act upon it.